XApCom Plugin

Owned by Anand Rajaraman
Last updated: Jan 17, 2020
1 min read

How does the 3VR XApCom plug-in get transaction data off of a XApCom ATM? What needs to be done on the 3VR side? Is any external hardware (e.g. SETI) required?

The 3VR XApCom plug-in scrapes the network for transaction data coming from an ATM with XApCom. As long as the steps above have been completed, the 3VR should be able to get transactions. You do not need a SETI or any other additional hardware.

Use the 3VR XApCom Plug-in Installation Guide to install and configure the plug-in on the 3VR end. If you aren't getting transactions, troubleshoot by adding an unmapped channel. Also verify the ATM/Teller ID using the Agilis configuration utility, shown in the screenshot below.