/
RAID BIOS

RAID BIOS

How to log into RAID BIOS on a P-Series Appliance?

Instructions

To get into BIOS on a P-Series:

  1. When the system is starting up, hit the Delete key multiple times until you hear a beep.

  2. A page will be displayed that says "System setup" in the middle. Get ready to press CTRL-I.

  3. When the screen changes to the RAID page, push CTRL-I (this step has to be performed quickly!)

If you see the prompt for the BIOS password, it’s too late. So hit ‘Ctrl-Alt-Delete’ and try again. The RAID BIOS will list the disks on the system and their status, size, and serial #, as well as the status of the RAID array.

 

Related content

RAID Drive Replacement Guide
RAID Drive Replacement Guide
More like this
Restoring a Failed Disk
Restoring a Failed Disk
More like this
Hot Spares
Hot Spares
More like this
Disk Failure
Disk Failure
More like this
System Manager
System Manager
More like this
Part Number
Part Number
More like this