/
Reset
Reset
- Anand Rajaraman
Owned by Anand Rajaraman
How to reset a 3VR SmartCam to default settings
It is necessary to reset 3VR system after upgrading the firmware, or after resolving a problem that you think might be fixed.
The camera reset will clear out the date/time and IP address settings. The customer will need to know this information and have access to the IQ Finder application so they can reprogram the camera after the reset.
Remote Reset
Enter the following URL into your web browser's address bar: URL format (http://xxx.xxx.xxx.xxx/set.oid?OidTB2.13) , where xxx represents the IP address of the camera. You will see the message "Server reset scheduled - delay 0 minutes" when the camera is restarting.
Local Reset
Power off,
Press and hold the reset button,
Power on,
Hold for 10-15 seconds then let go.
, multiple selections available,
Related content
No Events
No Events
More like this
Video Problems
Video Problems
More like this
3VR BOSCH Security Universal Driver User Guide
3VR BOSCH Security Universal Driver User Guide
More like this
IP Camera never loads
IP Camera never loads
More like this
Ticketech Plug-in
Ticketech Plug-in
More like this
Monitor shows a blank, black screen, or shows error
Monitor shows a blank, black screen, or shows error
More like this