IDENTIV EG-2 (Model 50-40-SB) Certified Version 1.1 Release Notes

Version 1.1 – Certified Release Thursday, August 24, 2023

IDENTIV EG-2 (Model 50-40-SB) is compatible with Primis and Primis Cloud Version 11.4 Only (Not supported on Freedom or Freedom Cloud)

IDENTIV EG-2 (Model 50-40-SB) Overview

The new IDENTIV EG-2 (Model 50-40-SB) is an IT-based door controller designed to manage all local access control seamlessly while integrating with any existing IT network infrastructure. Powered by 24 VDC or PoE+, the IDENTIV EG-2 (Model 50-40-SB) can connect with any Primis Cloud or Primis on-premise cube, regardless of its location, offering a wide variety of distributed topologies to suit any requirements. While connected to a Primis instance, the IDENTIV EG-2 (Model 50-40-SB) stores all the information required to provide access to its managed doors. In the event of a loss of connection to Primis, the IDENTIV EG-2 (Model 50-40-SB) retains its information, ensuring no downtime in operations or access for cardholders.

New Features

KEY FEATURES IN THIS RELEASE

• Support for up to 2 readers (2 OSDP or 2 Wiegand).

• Support for up to two doors with entry readers only or one door with entry/exit readers.

• Support for 3 relays, two doors relays, and one auxiliary relay.

• Support for up to 9 supervised inputs (Three per door and Three auxiliary) using IDENTIV DTLM3 and/or MELM3 modules.

• Support for Identiv DTLM1, DTLM2, DTLM3, MELM1, MELM2 and MELM3 line modules.

• Support for up to 500,000 credentials.

• Support for log capacity of 100,000 transactions when offline from Primis.

• Support for Enclosure tamper detection.

• Support for Reader tamper detection.

• Support for 24VDC or PoE+ input.

• Support for 24VDC and 12VDC outputs for Lock Power.

• Support for LED status indicators for Readers, Inputs, Outputs, EG-2 state, Network, Power, and OSDP RS485 status.

• Support for software and firmware updates from Primis.

• Support for Global Input/Output linking - peer to peer communications among IDENTIV EG-2 (Model 50-40-SB).

• Support for secured TLS/MQTT network communications.

• Support for TLS Certificate management.

• Support for continued local operations while offline from Primis.

• Support for OSDP V2.1.5 or later Secure Channel.

• Support for the IDENTIV Bridge Utility configuration tool.

• Support for direct NTP server configuration.

• Support for Primary and Secondary Server configuration.

• Support for Name Server configuration and resolution.

• Support for Principal and Replica IDENTIV EG-2 (Model 50-40-SB) configuration.

• Support for onboard logging.

• Support for PoE voltage, input voltage, door current, clock battery, and IDENTIV EG-2 (Model 50-40-SB) temperature monitoring in Primis.

• Support for locating ping.

• Support for IDENTIV EG-2 (Model 50-40-SB) remote reboot.

• Support for IDENTIV EG-2 (Model 50-40-SB) remote software and firmware upgrade.

• Support for configurable IDENTIV EG-2 (Model 50-40-SB) sync schedules.

• Support for RS485 OSDP address conflicts displayed in Primis.

• Compliant with (pending) UL294, UL2043, FCC Part 15 Class B, ICES-003, KS C 9832, EN 55032, TAA.

• IDENTIV EG-2 (Model 50-40-SB) online status is now CYAN instead of VIOLET.

Known Issues

• The reader buzzer managed by the IDENTIV EG-2 (Model 50-40-SB) is not supported in this release.

• Exit reader multi-factor is not supported in this release.

• Not all database records are synchronized in real-time, they are scheduled.

• OSDP readers do not function when IDENTIV EG-2 (Model 50-40-SB) does not have a database downloaded.

• IDENTIV EG-2 (Model 50-40-SB) displays erroneous “Up Time” during boot-up and when the MQTT connection is not ready.

• Special day schedules are not supported in this release.

• The silkscreen on the top case will differ from that shipped in the Release Item.

• Anti Passback is not available.

• Alert level handling is not available.