How to log into RAID BIOS?
Instructions
To get into BIOS on a P-Series:
When the system is starting up, hit the Delete key multiple times until you hear a beep.
A page will be displayed that says "System setup" in the middle. Get ready to press CTRL-I.
When the screen changes to the RAID page, push CTRL-I (this step has to be performed quickly!)
If you see the prompt for the BIOS password, it’s too late. So hit ‘Ctrl-Alt-Delete’ and try again. The RAID BIOS will list the disks on the system and their status, size, and serial #, as well as the status of the RAID array.