Troubleshooting Using LEDs

 

Controller LED Diagnostics

Troubleshooting the Controller Status Using LEDs

  • Below are configurations of LEDs that detail issues with a controller.

Status LEDs on the Mx-1

  • On the side of the Mx-1, there is a block of 16 LEDs that depict the status of the controller.

  • The following photo and table correspond in LED number to describe LED conditions.

Status LEDs on the Mx-1-ME

  • On the Mx-1-ME there is a set of 12 LEDs that depict the status of the controller.

  • The following photo and table correspond in LED number to describe LED conditions.

 

SNIB3 LED Diagnostics

Special light pattern at start up

  • To verify correct SNIB3 operation, view the SNIB3 LED pattern after powering on.

    • The pattern below indicates SNIB3/CCM Synchronization. It will repeat until the two units are synchronized.

SNIB3 LED light patterns for normal operation

  • The below table illustrates the SNIB3 LED pattern during normal operation.

 

Related pages