Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 45 Next »

Note: this command reference is provided for historical reference and troubleshooting purposes only. Please use the Velocity software for configuring your controllers. See: https://identivdocs.atlassian.net/wiki/x/R4G7B

Overview


This chapter details the Hirsch programming commands. It includes all the commands created or revised for v6.6 as well as new v7.x commands.

The Controller Command Reference is divided into these parts:

Command Reference

The following section provides detailed information on all the commands used in the DIGI*TRAC Control Language (DCL).

The topics covered for each command are:

  • Syntax

  • Variables (where appropriate)

  • Description

  • Examples

  • Defaults

  • Related Commands

In the following section, the square bracket [ ] is used to indicate that the variable or parameter is optional and need not be included unless necessary.

The đź“„ icon in the Related Commands subsection of each command indicates the command used to print out the current settings for the specific command.

Host-Based Commands

While there are several host-based commands—those commands which must be sent by a
host computer and routed through an XBox—only two of them are significant and can be
used in any way at all by a qualified operator. These are CMD 98 and CMD 198.

  • No labels