Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Installation and Configuration

Prerequisites

In order to successfully install the ATM Data Capture Plug-in, you will need the following:

  • IP address of each ATM

  • IP address of ATM transaction server (if known, will improve plug-in performance)

  • ATM Data Capture Plug-in Package, sent by 3VR Orders (mail_orders) with the order confirmation email. Includes the following files:

    • ATM Data Capture plug-in file: Plugins.AtmDataCaptureTransaction-Release-1.0.0.xxxxx-7.0.3pg

    • Network troubleshooting file: NetworkCaptureSupport.3pa

  • A network hub, or, if the network switch is capable of port-mirroring, a mirrored port that will be connected to the VIP Appliance’s secondary NIC. See the network diagrams on page 5 for more information.

  • A VIP Appliance with two network adapters (primary and secondary) is recommended. If you intend to install the plug-in on a VIP Appliance with only one NIC, see Appendix A.

Installation

  • No labels