When you change a Threat Level, only people with a higher Threat Level credential will be able to gain access.
Process to set the threat level:
Under Velocity Configuration, select Command Sets, the choose Add New DIGI*TRAC Command Sets
Set the Command Set Name, choose the Controller, enter Command, select Add
Below is a table with the Command Values to choose the Threat Level
Threat Level | Command Set |
|---|---|
0 | 403*0*8192*0 |
1 | 403*0*8192*1 |
2 | 403*0*8192*2 |
3 | 403*0*8192*3 |
4-99 | 403*0*8192*# |
How do I create a Credential with a higher Threat Level?
Under Enrollment Manager, select or create the credential, open Limits
Select the Threat Authority
