EGEG2-2-DIN-RAIL-CARRIERS KIT EG-2 DIN Rail Carriers Mounting instructions.
The EGEG2-2-DIN-RAIL-CARRIERS KIT is the accessory kit for mounting that will be used to mount the EG-2 controller to a standard DIN Rail.
The hardware in the EG-2EG2-DIN-RAIL-CARRIERS kit KIT includes two carriers and four screws, two #4 5/16 round head screws for each carrier.
Assembling the carriers to the back of EG-2
Two carriers will be installed in each EG-2, one on each side of the EG-2.
The carriers will be screwed to the screw provision provided on the back case of the EG-2. Caution: Do not overtighten screws into the EG-2 housing, do not use any screws other than the ones providedCare should be taken when assembling to not over tighten the included screws.
...
Assembling the EG-2 with the carrier to the DIN rail
...