Before installing and using the Velocity Web Services Client, you must first install Microsoft’s Internet Information Services (IIS) on your Velocity WorkstationServer, Velocity ServerWorkstation, or dedicated IIS Server.
...
For details about the Windows versions supported by recent Velocity releases, please look at refer to Step 4 in the Introduction topic below.
The details for installing IIS to support the Velocity Web Services Client vary somewhat for each version of Windows; that this information is provided in the appropriate version of the Velocity Web Services Client Installation Guide and Release Notes. For your convenience, this topic provides procedures for installing IIS on Windows 10\11 Pro, Windows Server 2016, 2019, and Windows Server 20192022.
System Requirements
This version of the Velocity Web Services Client requires the following components:
A physical access control system with various hardware components controlled by version 3Velocity v3.8.5 of the Hirsch Velocity security management system software6
The optional Velocity Web Services Client software
A Web Server running Microsoft’s Internet Information Services (IIS) (version 6.0 or later)
A For optimal performance, use a personal computer , tablet computer, or smartphone running a relatively current Web or tablet device running a modern web browser such as:
Google’s Chrome minimum version is 45 118.0 but recommended is 110 124.0
Microsoft’s Edge minimum version is 18 117.0 but recommended is 110 120.0
Mozilla’s Firefox minimum version is 34 119.0 but recommended is 110 124.0
Apple’s Safari minimum version is 10 17.0, but it is recommended to be 1617.04
Identiv recommends using Google’s Chrome browser with a device display resolution of 1024 1280 x 768720 px.. ( At a lower resolution, you will not be able to see part of an extensive dialog such as Credential Properties) .
...
resolutions, parts of extensive dialogs like Credential Properties may not be fully visible.
| Note |
|---|
Microsoft Internet Explorer is no longer supported. |
Prerequisite
The optional Velocity Web Services Client can be installed either as part of a full Velocity 3.8.5 during a new Velocity installation or separately after the Velocity installation. After installing this client, you must also perform a few configuration and setup tasks.
| Info |
|---|
To install the Velocity Web Services Client, you must be logged into Windows using an account with administrator privileges, and you must know the name and password of the Velocity Services account (specified during the Velocity installation). |
The Velocity Web Services Client must only is ONLY needed to be installed on your the server. If you want to install and use this optional client, you must first install Microsoft’s Internet Information Services (IIS). The installer checks your system to see whether all prerequisites have been met.
...
Before installing and using the Velocity Web Services Client, you must first install Microsoft’s Internet Information Services (IIS) on your standalone WorkstationVelocity Server, Velocity ServerWorkstation, or dedicated IIS Server.
The following table shows which versions of Windows are supported by Velocity 3.8.5 for those computer roles.
System Role | The supported |
|---|
versions of Windows by Velocity 3.8. |
|---|
6 | |
|---|---|
Velocity Server or Dedicated IIS Server |
|
Velocity Standalone Workstation |
|
The following procedures are for installing IIS on Windows 10, Windows \11 Pro, Windows Server 2016, Windows Server 2019 and Windows Server 2022.
Installing IIS on Windows 10 Pro
Open Control Panel.
Locate and click on the “Turn Turn Windows Features on or off” off link.
In the resulting Windows Features dialog, expand the .NET Framework 3.5 (includes .NET 2.0 and 3.0), the .NET Framework 4.7 Advanced Services, and the Internet Information Services folders to reveal the available options.
Check [√] the following set of options, and then click OK. (Most most of these options are shown in the subsequent screen capture.)
.NET Framework 3.5 (includes .NET 2.0 and 3.0)
.NET Framework 3.5 (includes .NET 2.0 and 3.0) > Windows Communication Foundation HTTP Activation
.NET Framework 3.5 (includes .NET 2.0 and 3.0) > Windows Communication Foundation Non-HTTP Activation
.NET Framework 4.7 Advanced Services > http://ASP.NET 4.7
NET Framework 4.7 Advanced Services > WCF Services > TCP Port Sharing
Internet Explorer 11
Internet Information Services > Web Management Tools > IIS 6 Management Compatibility
Internet Information Services > Web Management Tools > IIS 6 Management Compatibility > IIS 6 Management Console
Internet Information Services > Web Management Tools > IIS 6 Management Compatibility > IIS 6 Scripting Tools
Internet Information Services > Web Management Tools > IIS 6 Management Compatibility > IIS 6 WMI Compatibility
Internet Information Services > Web Management Tools > IIS 6 Management Compatibility > IIS 6 Metabase and IIS 6 configuration compatibility
Internet Information Services > Web Management Tools > IIS Management Console
Internet Information Services > World Wide Web Services > Application Development Features > .NET Extensibility 3.5
Internet Information Services > World Wide Web Services > Application Development Features > .NET Extensibility 4.7
Internet Information Services > World Wide Web Services > Application Development Features > http://ASP.NET 3.5
Internet Information Services > World Wide Web Services > Application Development Features > http://ASP.NET 4.7
Internet Information Services > World Wide Web Services > Application Development Features > ISAPI Extensions
Internet Information Services > World Wide Web Services > Application Development Features > ISAPI Filters
Internet Information Services > World Wide Web Services > Application Development Features > Web Socket Protocol
Internet Information Services > World Wide Web Services > Common HTTP Features > Default Document
Internet Information Services > World Wide Web Services > Common HTTP Features > HTTP Errors
Internet Information Services > World Wide Web Services > Common HTTP Features > Static Content
Internet Information Services > World Wide Web Services > Performance Features > Static Content Compression
Enabling the WebSocket Protocol option feature manually in IIS increases the efficiency of the web application.
...
Close the Control panel.
Installing IIS on Windows 11 Pro
Click on the Search icon given on the Windows 11 Taskbar.
Enter features and select the option “Turn Turn Windows features on or off“.off
This will open the Window Features dialog to enable the different in-built options of Windows 11 different options including the Internet Information Services (IIS).
From the list of the options, click the box given for Internet Information Services Web Management Tools - > World Wide Web Services to select them.
This installs IIS along with other IIS Management Console Application features.
Click on the OK button.
Wait for a few seconds for the features to get installed and then a dialog asks you to restart your the PC.Reboot your system Restart the PC for the changes to occur.take place
Installing IIS on Windows Server 2016
...
Installing IIS on Windows Server 2019
Open Control Panel.
Locate and click on the ‘ Programs and Features' link.
Once in the Programs and Features window, click on the “Turn Turn Windows Features on or off” off link.
In the resulting Server Manager window, click the Dashboard item (in the left pane), and click the Add roles and features link.
In the resulting Add Roles and Features Wizard | Before you Begin, click Next.
Select Role-based or feature-based installation in the Add Roles and Features Wizard | Installation Type, and click Next.
In the resulting Add Roles and Features Wizard | Server Selection, select a server from the server pool and click Next.
In the resulting Add Roles and Features Wizard | Server Roles, select Web Server (IIS).
In the resulting dialog that asks ‘Add features that are required for Web Server (IIS)?’, check [√] the option to ‘ Include management tools (if applicable), ’ and click the Add Features button, then click Next.
On the Select features page of the wizard, check [√] the following options (as shown in the screen capture), and click Next.
.NET Framework 3.5 Features
.NET Framework 3.5 Features > .NET Framework 3.5 (includes .NET 2.0 and 3.0)
.NET Framework 4.7 Features
.NET Framework 4.7 Features > .NET Framework 4.7 (Installed)
.NET Framework 4.7 Features > WCF Services > TCP Port Sharing (Installed)
In the resulting Add Roles and Features Wizard | Web Server Role (IIS), read the displayed information, and click Next.
On the wizard's resulting Select role services page, check [√] the following options (as shown in the subsequent screen capture), and click Next.
Web Server
Web Server > Common HTTP Features
Web Server > Common HTTP Features > Default Document
Web Server > Common HTTP Features > Directory Browsing
Web Server > Common HTTP Features > HTTP Errors
Web Server > Common HTTP Features > Static Content
Web Server > Common HTTP Features > HTTP Redirection
Web Server > Health and Diagnostics
Web Server > Health and Diagnostics > HTTP Logging
Web Server > Performance
Web Server > Performance > Static Content Compression
Web Server > Security
Web Server > Security > Request Filtering
Web Server > Application Development
Web Server > Application Development > .NET Extensibility 3.5
Web Server > Application Development > .NET Extensibility 4.7
Web Server > Application Development > http://ASP.NET 3.5
Web Server > Application
Development > http://ASP.NET 4.7
Web Server > Application Development > ISAPI Extensions
Web Server > Application Development > ISAPI Filters
Management Tools
Management Tools > IIS Management Console
Management Tools > IIS 6 Management Compatibility
Management Tools > IIS 6 Management Compatibility > IIS 6 Metabase Compatibility
Management Tools > IIS 6 Management Compatibility > IIS 6 Management Console
Management Tools > IIS 6 Management Compatibility > IIS 6 Scripting Tools
Management Tools > IIS 6 Management Compatibility > IIS 6 WMI Compatibility
Management Tools > IIS Management Scripts and Tools
On the wizard's resulting Confirm installation selections page, check [√] the option to ‘ Restart the destination server automatically if required, and review the displayed information to determine whether it is correct.
If something is not correct, click the Previous to return to the previous page and button to make the necessary changes.
If everything is correct, click the Install. button
Progress messages on the Installation progress page of the wizard are displayed until the installation is complete.
Verify that the Web Server (IIS) role was installed in the Server Manager window . You can and then close the Server Manager window and the Control Panel.
Installing IIS on Windows Server 2022
Open Control Panel.
Locate and click on the ‘ Programs and Features' link.
Once in the Programs and Features window, click on the 'Turn Windows Features on or off link.
In the resulting Server Manager window, click the Dashboard item (in the left pane), and click the Add roles and features link.
In the resulting Add Roles and Features Wizard | Before you Begin, click Next.
Select Role-based or feature-based installation in the Add Roles and Features Wizard | Installation Type, and click Next.
In the resulting Add Roles and Features Wizard | Server Selection, select a server from the server pool, and click Next.
In the resulting Add Roles and Features Wizard | Server Roles, select Web Server (IIS).
In the resulting dialog that asks ‘Add features that are required for Web Server (IIS)?’, check [√] the option to ‘ Include management tools (if applicable), ’ and click the Add Features button, then click Next.
On the Select features page of the wizard, check [√] the following options (as shown in the screen capture), and click Next.
.NET Framework 3.5 Features
.NET Framework 3.5 Features > .NET Framework 3.5 (includes .NET 2.0 and 3.0)
.NET Framework 4.8 Features
.NET Framework 4.8 Features > .NET Framework 4.8 (Installed)
.NET Framework 4.8 Features > WCF Services > TCP Port Sharing (Installed)
In the resulting Add Roles and Features Wizard | Web Server Role (IIS), read the displayed information, and click Next.
On the wizard's resulting Select role services page, check [√] the following options (as shown in the subsequent screen capture), and click Next.
Web Server
Web Server > Common HTTP Features
Web Server > Common HTTP Features > Default Document
Web Server > Common HTTP Features > Directory Browsing
Web Server > Common HTTP Features > HTTP Errors
Web Server > Common HTTP Features > Static Content
Web Server > Common HTTP Features > HTTP Redirection
Web Server > Health and Diagnostics
Web Server > Health and Diagnostics > HTTP Logging
Web Server > Performance
Web Server > Performance > Static Content Compression
Web Server > Security
Web Server > Security > Request Filtering
Web Server > Application Development
Web Server > Application Development > .NET Extensibility 3.5
Web Server > Application Development > .NET Extensibility 4.8
Web Server > Application Development > ASP.NET 3.5
Web Server > Application Development > ASP.NET 4.8
Web Server > Application Development > ISAPI Extensions
Web Server > Application Development > ISAPI Filters
Web Server > Application Development > WebSocket Protocol
Management Tools
Management Tools > IIS Management Console
Management Tools > IIS 6 Management Compatibility
Management Tools > IIS 6 Management Compatibility > IIS 6 Metabase Compatibility
Management Tools > IIS 6 Management Compatibility > IIS 6 Management Console
Management Tools > IIS 6 Management Compatibility > IIS 6 Scripting Tools
Management Tools > IIS 6 Management Compatibility > IIS 6 WMI Compatibility
Management Tools > IIS Management Scripts and Tools
On the wizard's resulting Confirm installation selections page, check [√] the option to ‘ Restart the destination server automatically if required, and review the displayed information to determine whether it is correct.
If something is not correct, click the Previous to return to the previous page and button to make the necessary changes.
If everything is correct, click the Install. button
Progress messages on the Installation progress page of the wizard are displayed until the installation is complete.
Verify that the Web Server (IIS) role was installed in the Server Manager window . You can and then close the Server Manager window and the Control Panel.
Configuring the
...
Network Port used by the
...
Default IIS Web
...
Site
The Velocity Web Services Client works like a typical Web page and connects to Microsoft’s IIS using the HTTP protocol. The default network port is 80, which some other programs might already be using.
...
From your Windows Server Start menu (on the computer where IIS and the Velocity Server are installed), select Administrative Tools ▶ > Internet Information Services (IIS) Manager.
In the Connections pane of the Internet Information Services (IIS) Manager window, expand the computer name, expand Sites, and then click on Default Web Site.
In the Actions pane (under Edit Site), click on Bindings.
In the resulting Site Bindings dialog, click the HTTP entry, and then click on Edit.
In the resulting Edit Site Bindings dialog, enter the desired value (such as 8080) for the Port, and click OK.
Close the Site Bindings dialog.
In the Actions pane of the Internet Information Services (IIS) Manager window (under Manage Web Site), click Stop, and then Start.
Ensuring that the Network Port used by the Default IIS Web Site is Allowed Through Your Firewalls
Because the Velocity Web Services Client communicates across a shared network (instead of a dedicated physical security network), you will have to work with your network administrator to ensure that the network port used by the default Default IIS Web site Site is allowed through your firewalls. Some networks use the software firewall provided with Microsoft Windows, others use a software firewall provided by a different vendor (as shown in the following image), and high-security networks include hardware firewalls.
...
Because the firewalls on a network can vary so much, we cannot provide a detailed procedure for your specific network. But the following example for the Windows 7 Windows 10 Pro Firewall should help illustrate the general process.
Open the Windows 10 Control Panel, and click on the Windows Firewall link.
Click on the Advanced settings link (in the left column).
In the resulting Windows Firewall with Advanced Security window, click on Inbound Rules (in the left pane), and then click on New Rule… in the Actions pane.
Select the Port option on the Rule Type page of the resulting New Inbound Rule Wizard, and then click Next.
On the Protocol and Ports page, select the TCP option, select the Specific local ports option, enter the desired value (such as 8080), and click Next.
On the Action page, click Next to accept the defaults.default selection
On the Profile page, click Next to accept the defaults.default selections
On the Name page, enter the required name in the Name field, optionally enter a description in the Description field, and click Finish.
This allows the Network Port used by the Default IIS Web Site through your Firewalls.