...
| Scroll pagebreak |
|---|
Figure 3: Connector E
...
These connectors are part of Terminal Block T1.
...
CONNECTOR | INPUT / OUTPUT / DESTINATION | |
|---|---|---|
DT 1 | Door Trip 1 | |
DT 2 | Door Trip 2 | |
GND | Door Trip 1 Ground | |
EB 1 | Exit Button 1 | |
EB 2 | Exit Button 2 | |
GND | Door Trip 2 Ground | |
GPO 1 | General Purpose Output 1 – IDENTIV INTERNAL USE ONLY | |
GPO 2 | General Purpose Output 2 – IDENTIV INTERNAL USE ONLYGND | RS-232 Ground |
TX | RS-232 TX button | |
RX | RS-232 RX button | |
LOCK | Postal Lock | |
GND | Postal Lock Ground |
...
Figure 4: Door Strike Relay Connector (Connector F)
...
...
CONNECTOR | INPUT / OUTPUT / DESTINATION |
+12 V BAT | 12 V DC From Power Supply |
GND | Ground Input from Power Supply |
NC 1 | Relay 1 – Normally Closed |
COM | Common |
NO 1 | Relay 1 Normally Open |
NC 2 | Relay 2 Normally Closed |
COM | Common |
NO 2 | Relay 2 Normally Open |
...