...
o PRIMIS server will now support Timezone for the US (Hawaii, Alaska, Pacific, Mountain, Central, and Eastern), Australia (Western, Central Western, Central, and Eastern), and India.
o Card read performance improved. Bridge mode takes 240 msec while controller mode takes just 220 msec.
o Reset switch action: 2 seconds - STM reset, 5 seconds – EG-2 Reboot, and 20+ seconds - Factory reset. Tolerance of 7 seconds for EG-2 reboot.
...
o API “DeviceModuleGetSpiData” will now return 0 when there is no data to fetch.
Feature List
Freedom PRIMIS server Lite BETA
o Use mDNS to help with device discovery over UDP.
...
o Sync controlled area status with Freedom PRIMIS server after re-connection.
...
o In controller mode, send/backlog tamper, linerror, and inputevent messages to Freedom PRIMIS server after re-connection.
o Input Sensor LED.
...
o OSDP in Bridge Mode - card swipe events are forwarded to Freedom PRIMIS server for access processing.
...
o Analog values (e.g. voltage, temperature) are reported to Freedom PRIMIS server.
o Use OSDP built-in LED blink feature to handle multi-factor prompts.
...
o Current Live DB update will be pushed to SB when SB re-connects to freedom PRIMIS server.
o Missing interrupt problem was resolved.
...
o Capture and report STM communication error statistics (e.g. CRC, Timeout) to Freedom PRIMIS server every 24 hours.
Freedom Core
...
o SB is able to report Controlled Area status back to Freedom PRIMIS server after re-connection.
o EXIT reader port usage cache is updated immediately after configuration.
...
o Implement two additional reader-tampered input ports.
o Report RS485 Address Conflicts in Freedom PRIMIS server GUI.
o In controller mode, send/backlog tamper, linerror, and inputevent messages to Freedom PRIMIS server after re-connection.
o Fix "Bridge OffLine" error icon when OSDP readers are offline.
...
o Report battery status (voltage, charging, etc) available to the Freedom PRIMIS Server.
o When executing the bridge mode Multi-factor prompt, let SB handles it using the on/off timered LED command.
...
o Synchronize Unlock schedules and controlled area status when SB re-connects to freedom PRIMIS server.
o Freedom PRIMIS server GUI - Controlled Area should be flagged (e.g. alert icons) when devices involved are off-line.
...
o Access request performance optimization.
Limitations and Known Issues
o OSDP readers do not work when Smart Bridge EG-2 has no DB downloaded.
o Smart Bridge EG-2 shows huge “Up Time” during boot up and when the MQTT connection is not ready.