...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Section 1:
...
Accessories and
...
Modifications
All panels and kiosks have been factory tested before shipping to ensure all functions are operating correctly and the panel or kiosk is ready for proper installation and activation. Please see the notes below regarding any modifications to panels or kiosks.
...
Physical access to your new panel or kiosk is secured through the keyed lock mechanism located either at the top (EnterphoneTM Enterphone 19), front (EnterphoneTM Enterphone IQiQ) or back (EnterphoneTM Kiosk).
To ensure proper operation of the locking mechanism, ensure that the lock strike remains perpendicular to the leading edge of the panel or kiosk when the unit is open and showing the strike. If the lock strike is not in the correct position the mechanism may not effectively lock the panel or kiosk.
It is strongly recommended that keys be copied after purchase and placed in a documented and secured location to allow access to the panel or kiosk as needed. Loss of keys will require physical removal and replacement of the lock at the expense of the customer. Lock replacement or modification must be completed by a technician approved by Identiv. Any uncertified or third-party modification of the lock mechanism will immediately void the manufacturer warranty.
...
| Info |
|---|
Contact your Identiv sales rep to discuss protective equipment for your product. |
...
Mounting your Enterphone
Two people are required to safely mount the Enterphone 19 product.
...
Route these cables to the product installation site and through the cut-outs in the wall. Allow enough slack to connect the cables to your product. Do not connect the power supply to mains power yet.
Connect the cables to the product
...
Length | Minimum Gauge |
|---|---|
up to 25 feet / 7.5m' | 14 AWG |
up 25' to 40 feet / 12m' | 12 AWG |
| Info |
|---|
After installing the Enterphone and connecting power, attach a label to the power cable indicating the max voltage and current (12VDC and 5A). |
Section 5: Virtual Access and Programming
Tenant and access updating of the panel is accomplished through the Identiv Web Graphical User Interface (GUI) (see figure below). The Web Administration and login Page page for this GUI is are accessible via any standard Web Browserweb browser, provided that the PC is on the same Local Area Network as the panel. The default IP address for each panel is 192.168.123.101.
| Info |
|---|
Please refer to the EnterphoneTM Software Administration Guide for additional information concerning the configuration and management of your panel or kiosk. |
...
USERNAME: freedom
PASSWORD: viscount
| Infonote |
|---|
These should must be changed from the defaults during the software configuration process. |
...
Table 1: Technical Specifications
| Screen Size (inches) | Overall Dimensions (inches) | Weight | Operating Temperature | Power Requirements | Touch Function Capabilities |
EnterphoneTM Kiosk | 19 in | 50.0 x 18.0 x 12.0 | 96 lbs | 0o – 49o C | 24v AC, 40 VA min | YES |
EnterphoneTM 19 | 19 in | 20.87 x 16.47 x 4.0 | 21 lbs | 0o – 49o C | 24v AC, 40 VA min | YES |
EnterphoneTM |
iQ | 10 in | 16.5 x 12.5 x 3.4 | 16 lbs | 0o – 49o C | 24v AC, 40 VA min | NO |
Figure 3: DIP Switches, Voltage Output Selection
...