...
| Info |
|---|
The Velocity Web Services Client is an optional feature. If your organization isn’t comfortable providing remote access to your access control system, do not install IIS or the Velocity Web Services, Client. |
For details about the Windows versions supported by recent Velocity releases, see please look at Step 4 in the Introduction topic below.
...
Before installing and using the Velocity Web Services Client, you must first install Microsoft’s Internet Information Services (IIS). If your organization isn’t comfortable providing remote access to your physical access control system, do not install IIS or the Velocity Web Services,perform Client.
System Requirements
...
5. Close the Control panel.
Installing IIS on Windows 11
Click on the Search icon given on the Windows 11 Taskbar.
Enter features and select the option “Turn Windows features on or off“.
This will open the Window Features dialog to enable the different in-built options of Windows 11
...
including the Internet Information Services (IIS).
From the list of the options, click the box given for Internet Information Services Web Management Tools-> World Wide Web Services to select them.
This installs IIS along with other IIS Management Console Application features.
Click on the OK button.
Wait for a few seconds for the features to get installed and then a dialog asks you to restart your PC.Reboot your system for the changes to occur.
Installing IIS on Windows Server 2016
...
Open Control Panel.
Locate and click on the ‘Programs and Features' link.
Once in the Programs and Features window, click on the 'Turn Windows Features on or off link.
In the resulting Server Manager window, click the Dashboard item (in the left pane), and click the Add roles and features link.
In the resulting Add Roles and Features Wizard | Before you Begin, click Next.
Select Role-based or feature-based installation in the Add Roles and Features Wizard | Installation Type, and click Next.
In the resulting Add Roles and Features Wizard | Server Selection, select a server from the server pool and click Next.
In the resulting Add Roles and Features Wizard | Server Roles, select Web Server (IIS).
In the resulting dialog that asks ‘Add features that are required for Web Server (IIS)?’, check[√] the option to ‘Include management tools (if applicable),’ and click the Add Features button, then click Next.
On the Select features page of the wizard, check [√]the following options (as shown in the screen capture), and click Next.
.NET Framework 3.5 Features
.NET Framework 3.5 Features > .NET Framework 3.5 (includes .NET 2.0 and 3.0)
.NET Framework 4.7 Features
.NET Framework 4.7 Features > .NET Framework 4.7 (Installed)
.NET Framework 4.7 Features > WCF Services > TCP Port Sharing (Installed)
In the resulting Add Roles and Features Wizard | Web Server Role (IIS), read the displayed information, and click Next.
On the wizard's resulting Select role services page, check [√] the following options (as shown in the subsequent screen capture), and click Next.
Web Server
Web Server > Common HTTP Features
Web Server > Common HTTP Features > Default Document
Web Server > Common HTTP Features > Directory Browsing
Web Server > Common HTTP Features > HTTP Errors
Web Server > Common HTTP Features > Static Content
Web Server > Common HTTP Features > HTTP Redirection
Web Server > Health and Diagnostics
Web Server > Health and Diagnostics > HTTP Logging
Web Server > Performance
Web Server > Performance > Static Content Compression
Web Server > Security
Web Server > Security > Request Filtering
Web Server > Application Development
Web Server > Application Development > .NET Extensibility 3.5
Web Server > Application Development > .NET Extensibility 4.7
Web Server > Application Development > ASP.NET 3.5
Web Server > Application Development > ASP.NET 4.7
Web Server > Application Development > ISAPI Extensions
Web Server > Application Development > ISAPI Filters
Management Tools
Management Tools > IIS Management Console
Management Tools > IIS 6 Management Compatibility
Management Tools > IIS 6 Management Compatibility > IIS 6 Metabase Compatibility
Management Tools > IIS 6 Management Compatibility > IIS 6 Management Console
Management Tools > IIS 6 Management Compatibility > IIS 6 Scripting Tools
Management Tools > IIS 6 Management Compatibility > IIS 6 WMI Compatibility
Management Tools > IIS Management Scripts and Tools
On the wizard's resulting Confirm installation selections page, check [√] the option to ‘Restart the destination server automatically if required, and review the displayed information to determine whether it is correct.
If something is not correct, click Previous to return to the previous page and make the necessary changes.
If everything is correct, click Install.
Progress messages on the Installation progress page of the wizard are displayed until the installation is complete.
Verify that the Web Server (IIS) role was installed in the Server Manager window. You can then close the Server Manager window and the Control Panel.
...
Open Control Panel.
Locate and click on the ‘Programs and Features' link.
Once in the Programs and Features window, click on the 'Turn Windows Features on or off link.
In the resulting Server Manager window, click the Dashboard item (in the left pane), and click the Add roles and features link.
In the resulting Add Roles and Features Wizard | Before you Begin, click Next.
Select Role-based or feature-based installation in the Add Roles and Features Wizard | Installation Type, and click Next.
In the resulting Add Roles and Features Wizard | Server Selection, select a server from the server pool and click Next.
In the resulting Add Roles and Features Wizard | Server Roles, select Web Server (IIS).
In the resulting dialog that asks ‘Add features that are required for Web Server (IIS)?’, check[√] the option to ‘Include management tools (if applicable),’ and click the Add Features button, then click Next.
On the Select features page of the wizard, check [√]the following options (as shown in the screen capture), and click Next.
.NET Framework 3.5 Features
.NET Framework 3.5 Features > .NET Framework 3.5 (includes .NET 2.0 and 3.0)
.NET Framework 4.8 Features
.NET Framework 4.8 Features > .NET Framework 4.8 (Installed)
.NET Framework 4.8 Features > WCF Services > TCP Port Sharing (Installed)
In the resulting Add Roles and Features Wizard | Web Server Role (IIS), read the displayed information, and click Next.
On the wizard's resulting Select role services page, check [√] the following options (as shown in the subsequent screen capture), and click Next.
Web Server
Web Server > Common HTTP Features
Web Server > Common HTTP Features > Default Document
Web Server > Common HTTP Features > Directory Browsing
Web Server > Common HTTP Features > HTTP Errors
Web Server > Common HTTP Features > Static Content
Web Server > Common HTTP Features > HTTP Redirection
Web Server > Health and Diagnostics
Web Server > Health and Diagnostics > HTTP Logging
Web Server > Performance
Web Server > Performance > Static Content Compression
Web Server > Security
Web Server > Security > Request Filtering
Web Server > Application Development
Web Server > Application Development > .NET Extensibility 3.5
Web Server > Application Development > .NET Extensibility 4.8
Web Server > Application Development > ASP.NET 3.5
Web Server > Application Development > ASP.NET 4.8
Web Server > Application Development > ISAPI Extensions
Web Server > Application Development > ISAPI Filters
Web Server > Application Development > WebSocket Protocol
Management Tools
Management Tools > IIS Management Console
Management Tools > IIS 6 Management Compatibility
Management Tools > IIS 6 Management Compatibility > IIS 6 Metabase Compatibility
Management Tools > IIS 6 Management Compatibility > IIS 6 Management Console
Management Tools > IIS 6 Management Compatibility > IIS 6 Scripting Tools
Management Tools > IIS 6 Management Compatibility > IIS 6 WMI Compatibility
Management Tools > IIS Management Scripts and Tools
On the wizard's resulting Confirm installation selections page, check [√] the option to ‘Restart the destination server automatically if required, and review the displayed information to determine whether it is correct.
If something is not correct, click Previous to return to the previous page and make the necessary changes.
If everything is correct, click Install.
Progress messages on the Installation progress page of the wizard are displayed until the installation is complete.
Verify that the Web Server (IIS) role was installed in the Server Manager window. You can then close the Server Manager window and the Control Panel.
...
Display an About dialog which shows version information for Velocity and the Velocity Web Services Client
Open the Settings page, where you can specify some options for the Velocity Web Services Client (including the Landing Page, which is the default page displayed after you log in)
Open the Enrollment tab to set the Query Size, which will determine the Enrollment Manager Search results (between 5 - 50). The default value is 10.
Open the Alarms tab to view the default fields:
Open the Events tab to view the default fields:
Select the Status Dashboard to view the default fields.
Click the Security Settings tab to view and modify the available fields.
Logout from your current session (and return to the Login page)
...
Enrollment Page
The Enrollment page of the Velocity Web Services Client provides the most critical functionality of Velocity’s Enrollment Manager.
...