Versions Compared

Version Old Version 19 New Version 20
Changes made by

Anand Rajaraman

Anand Rajaraman

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • A physical access control system with various hardware components controlled by version 3.8.5 of the Hirsch Velocity security management system software

  • The optional Velocity Web Services Client

  • A Web Server running Microsoft’s Internet Information Services (IIS) (version 6.0 or later)

  • A personal computer, tablet computer, or smartphone running a relatively current Web browser such as:

    • Google’s Chrome minimum version is 45.0 but recommended is 98107.0

    • Microsoft’s Edge minimum version is 18.0 but recommended is 98107.0

    • Mozilla’s Firefox minimum version is 34.0 but recommended is 97106.0

    • Apple’s Safari minimum version is 10.0, but it is recommended to be 1516.0

Identiv recommends using Google’s Chrome browser with a device display resolution of 1024 x 768. (At a lower resolution, you will not be able to see part of an extensive dialog such as Credential Properties) .

...

The following procedures are for installing IIS on Windows 10, Windows Server 2016, and Windows Server 20162019 .

Installing IIS on Windows 10

  1. Open Control Panel.

  2. Locate and click on the ‘Turn Windows Features on or off link.

  3. In the resulting Windows Features dialog, expand the .NET Framework 3.5 (includes .NET 2.0 and 3.0), the .NET Framework 4.7 Advanced Services, and the Internet Information Services folders to reveal the available options.

  4. Check [√]the following set of options, and then click OK. (Most of these options are shown in the subsequent screen capture.)

    • .NET Framework 3.5 (includes .NET 2.0 and 3.0)

    • .NET Framework 3.5 (includes .NET 2.0 and 3.0) > Windows Communication Foundation HTTP Activation

    • .NET Framework 3.5 (includes .NET 2.0 and 3.0) > Windows Communication Foundation Non-HTTP Activation

    • .NET Framework 4.7 Advanced Services > ASP.NET 4.7

    • NET Framework 4.7 Advanced Services > WCF Services > TCP Port Sharing

    • Internet Explorer 11

    • Internet Information Services > Web Management Tools > IIS 6 Management Compatibility

    • Internet Information Services > Web Management Tools > IIS 6 Management Compatibility > IIS 6 Management Console

    • Internet Information Services > Web Management Tools > IIS 6 Management Compatibility > IIS 6 Scripting Tools

    • Internet Information Services > Web Management Tools > IIS 6 Management Compatibility > IIS 6 WMI Compatibility

    • Internet Information Services > Web Management Tools > IIS 6 Management Compatibility > IIS 6 Metabase and IIS 6 configuration compatibility

    • Internet Information Services > Web Management Tools > IIS Management Console

    • Internet Information Services > World Wide Web Services > Application Development Features > .NET Extensibility 3.5

    • Internet Information Services > World Wide Web Services > Application Development Features > .NET Extensibility 4.7

    • Internet Information Services > World Wide Web Services > Application Development Features > ASP.NET 3.5

    • Internet Information Services > World Wide Web Services > Application Development Features > ASP.NET 4.7

    • Internet Information Services > World Wide Web Services > Application Development Features > ISAPI Extensions

    • Internet Information Services > World Wide Web Services > Application Development Features > ISAPI Filters

    • Internet Information Services > World Wide Web Services > Application Development Features > Web Socket Protocol

    • Internet Information Services > World Wide Web Services > Common HTTP Features > Default Document

    • Internet Information Services > World Wide Web Services > Common HTTP Features > HTTP Errors

    • Internet Information Services > World Wide Web Services > Common HTTP Features > Static Content

    • Internet Information Services > World Wide Web Services > Performance Features > Static Content Compression

  5. Close the Control Panel.

Enabling the WebSocket Protocol option manually in IIS increases the efficiency of the web application for dashboard in Velocity.

Installing IIS on Windows Server 2016

...

  1. Open Control Panel.

  2. Locate and click on the ‘Programs and Features' link.

  3. Once in the Programs and Features window, click on the 'Turn Windows Features on or off link.

  4. In the resulting Server Manager window, click the Dashboard item (in the left pane), and click the Add roles and features link.

  5. In the resulting Add Roles and Features Wizard | Before you Begin, click Next.

  6. Select Role-based or feature-based installation in the Add Roles and Features Wizard | Installation Type, and click Next.

  7. In the resulting Add Roles and Features Wizard | Server Selection, select a server from the server pool and click Next.

  8. In the resulting Add Roles and Features Wizard | Server Roles, select Web Server (IIS).

  9. In the resulting dialog that asks ‘Add ‘Add features that are required for Web Server (IIS)?’, check[√] the option to ‘Include management tools (if applicable),’ and click the Add Features button, then click Next.

  10. On the Select features page of the wizard, check [√]the following options (as shown in the screen capture), and click Next.

    • .NET Framework 3.5 Features

    • .NET Framework 3.5 Features > .NET Framework 3.5 (includes .NET 2.0 and 3.0)

    • .NET Framework 4.7 Features

    • .NET Framework 4.7 Features > .NET Framework 4.7 (Installed)

    • .NET Framework 4.7 Features > WCF Services > TCP Port Sharing (Installed)

  11. In the resulting Add Roles and Features Wizard | Web Server Role (IIS), read the displayed information, and click Next.

  12. On the wizard's resulting Select role services page, check [√] the following options (as shown in the subsequent screen capture), and click Next.

    • Web Server

    • Web Server > Common HTTP Features

    • Web Server > Common HTTP Features > Default Document

    • Web Server > Common HTTP Features > Directory Browsing

    • Web Server > Common HTTP Features > HTTP Errors

    • Web Server > Common HTTP Features > Static Content

    • Web Server > Common HTTP Features > HTTP Redirection

    • Web Server > Health and Diagnostics

    • Web Server > Health and Diagnostics > HTTP Logging

    • Web Server > Performance

    • Web Server > Performance > Static Content Compression

    • Web Server > Security

    • Web Server > Security > Request Filtering

    • Web Server > Application Development

    • Web Server > Application Development > .NET Extensibility 3.5

    • Web Server > Application Development > .NET Extensibility 4.7

    • Web Server > Application Development > ASP.NET 3.5

    • Web Server > Application Development > ASP.NET 4.7

    • Web Server > Application Development > ISAPI Extensions

    • Web Server > Application Development > ISAPI Filters

    • Management Tools

    • Management Tools > IIS Management Console

    • Management Tools > IIS 6 Management Compatibility

    • Management Tools > IIS 6 Management Compatibility > IIS 6 Metabase Compatibility

    • Management Tools > IIS 6 Management Compatibility > IIS 6 Management Console

    • Management Tools > IIS 6 Management Compatibility > IIS 6 Scripting Tools

    • Management Tools > IIS 6 Management Compatibility > IIS 6 WMI Compatibility

    • Management Tools > IIS Management Scripts and Tools

  13. On the wizard's resulting Confirm installation selections page, check [√] the option to ‘Restart the destination server automatically if required, and review the displayed information to determine whether it is correct.

    • If something is not correct, click Previous to return to the previous page and make the necessary changes.

    • If everything is correct, click Install.

  14. Progress messages on the Installation progress page of the wizard are displayed until the installation is complete.

  15. Verify that the Web Server (IIS) role was installed in the Server Manager window. You can then close the Server Manager window and the Control Panel.

Installing IIS on Windows Server 2022

  1. Open Control Panel.

  2. Locate and click on the ‘Programs and Features' link.

  3. Once in the Programs and Features window, click on the 'Turn Windows Features on or off link.

  4. In the resulting Server Manager window, click the Dashboard item (in the left pane), and click the Add roles and features link.

  5. In the resulting Add Roles and Features Wizard | Before you Begin, click Next.

  6. Select Role-based or feature-based installation in the Add Roles and Features Wizard | Installation Type, and click Next.

  7. In the resulting Add Roles and Features Wizard | Server Selection, select a server from the server pool and click Next.

  8. In the resulting Add Roles and Features Wizard | Server Roles, select Web Server (IIS).

  9. In the resulting dialog that asks ‘Add features that are required for Web Server (IIS)?’, check[√] the option to ‘Include management tools (if applicable),’ and click the Add Features button, then click Next.

  10. On the Select features page of the wizard, check [√]the following options (as shown in the screen capture), and click Next.

    • .NET Framework 3.5 Features

    • .NET Framework 3.5 Features > .NET Framework 3.5 (includes .NET 2.0 and 3.0)

    • .NET Framework 4.8 Features

    • .NET Framework 4.8 Features > .NET Framework 4.8 (Installed)

    • .NET Framework 4.8 Features > WCF Services > TCP Port Sharing (Installed)

      Image Added

  11. In the resulting Add Roles and Features Wizard | Web Server Role (IIS), read the displayed information, and click Next.

  12. On the wizard's resulting Select role services page, check [√] the following options (as shown in the subsequent screen capture), and click Next.

    • Web Server

    • Web Server > Common HTTP Features

    • Web Server > Common HTTP Features > Default Document

    • Web Server > Common HTTP Features > Directory Browsing

    • Web Server > Common HTTP Features > HTTP Errors

    • Web Server > Common HTTP Features > Static Content

    • Web Server > Common HTTP Features > HTTP Redirection

    • Web Server > Health and Diagnostics

    • Web Server > Health and Diagnostics > HTTP Logging

    • Web Server > Performance

    • Web Server > Performance > Static Content Compression

    • Web Server > Security

    • Web Server > Security > Request Filtering

    • Web Server > Application Development

    • Web Server > Application Development > .NET Extensibility 3.5

    • Web Server > Application Development > .NET Extensibility 4.8

    • Web Server > Application Development > ASP.NET 3.5

    • Web Server > Application Development > ASP.NET 4.8

    • Web Server > Application Development > ISAPI Extensions

    • Web Server > Application Development > ISAPI Filters

    • Web Server > Application Development > WebSocket Protocol

    • Management Tools

    • Management Tools > IIS Management Console

    • Management Tools > IIS 6 Management Compatibility

    • Management Tools > IIS 6 Management Compatibility > IIS 6 Metabase Compatibility

    • Management Tools > IIS 6 Management Compatibility > IIS 6 Management Console

    • Management Tools > IIS 6 Management Compatibility > IIS 6 Scripting Tools

    • Management Tools > IIS 6 Management Compatibility > IIS 6 WMI Compatibility

    • Management Tools > IIS Management Scripts and Tools

      Image Added

  13. On the wizard's resulting Confirm installation selections page, check [√] the option to ‘Restart the destination server automatically if required, and review the displayed information to determine whether it is correct.

    • If something is not correct, click Previous to return to the previous page and make the necessary changes.

    • If everything is correct, click Install.

  14. Progress messages on the Installation progress page of the wizard are displayed until the installation is complete.

  15. Verify that the Web Server (IIS) role was installed in the Server Manager window. You can then close the Server Manager window and the Control Panel.

...

  • Display an About dialog which shows version information for Velocity and the Velocity Web Services Client

  • Open the Settings page, where you can specify some options for the Velocity Web Services Client (including the Landing Page, which is the default page displayed after you log in)

  • Open the Enrollment tab to set the Query Size, which will determine the Enrollment Manager Search results (between 5 - 50).  The default value is 10.

  • Open the Alarms tab to view the default fields:

  • Open the Events tab to view the default fields:

  • Select the Status Dashboard to view the default fields.

  • Click the Security Settings tab to view and modify the available fields.

  • Logout from your current session (and return to the Login page)

View file
nameUpdated_successfully
pageVelocity Client/Server Update

Enrollment Page

The Enrollment page of the Velocity Web Services Client provides the most critical functionality of Velocity’s Enrollment Manager.

...