/
How do I update the CCM Firmware through Velocity?

How do I update the CCM Firmware through Velocity?

Owned by Hadden Grant
Last updated: Jul 08, 2024 by Eduardo Bahena
2 min read

Updating CCM Firmware can be done easily through Velocity software. CCM files can be obtained through Identiv Support’s site

https://identivdocs.atlassian.net/wiki/spaces/HBI/pages/784269478

Below are the steps to complete this task:

  • Download the CCM firmware through the Partner Portal link on the Identiv Support page

  • Once downloaded, inside Velocity, select the ID Icon, then Data Exchange, then CCM Import

 

image-20240708-205725.png

  • Once there, select the file, select next, then finish

  • Next, open Controller Properties, then select Update CCM Firmware

  • Please do not power down the controller during a firmware flash. While the CCM is downloading the firmware file, the controller will remain connected to Velocity. During the firmware flashing the controller will reboot and reconnect to Velocity.

  • Once complete you should see a Firmware updated completed message in event viewer. You can also go into the controller properties to see the updated firmware revision.

Related content