Page Comparison

...

1. Launch 3VR System Manager.

2. In the Configure panel, right-click the name of the VMS server and select Start Web Services from the menu.

3. Click OK to confirm.

Creating 3VR User Account for C•CURE Integration

In Section 7.2.3 of this guide, you will need to give the C•CURE system login information for an Integrator-level 3VR user account with access to all the VMS servers you plan to use in your integration. We recommend that you create a new user for this purpose. Use the following steps to create a new user account that will be reserved for the C•CURE integration:

...

1. Log on to the Software House C•CURE system with a user account with administrative access.

2. Double-click the 3VR_C•CureInstaller-Release-7.0.0.98811-final.exe file to launch the InstallShield Wizard.
   It may be necessary to right-click the .exe and select Run as administrator.

3. The C•CURE integration requires the Microsoft .NET Framework 4.0 to function.

4. Click Install to proceed.

5. At the InstallShield Wizard Welcome screen, click Next >.

6. At the Custom Setup screen, specify which component of the integration to install. By default, both components are selected.

   1. Server

      1. If the current machine is the C•CURE server, this should be selected

         

      2. If it is a C•CURE client PC, click the drop-down arrow and select This feature will not be installed

         

   2. Client

      1. If the current machine is the C•CURE server and it does not have client software also installed, click the drop-down arrow and select This feature will not be installed

         

      2. If it is a C•CURE client PC, this should be selected

         

7. Click Next >.

8. If the Server component was selected in step 5, the Database Server screen will appear. Specify the following:

   • The location of the C•CURE database server

   • How to connect to the database. If not using Windows authentication credentials, select ¤ Server authentication using the Login ID and password below and enter the user name and password to use to connect to the database

   • The name of the C•CURE database catalog

9. Click Next >.

10. Click Install to install the software.

11. When installation is complete, click Finish to close the wizard.

...