...
Launch OnGuard VideoViewer.
Verify video on all channels. If video fails to load, see Appendix C.
...
Launch the OnGuard System Administration application.
From the Video menu, select Digital Video.
Select the Device – Camera Links tab.
Click Add.
Select the device type from the Device Type drop-down. This will most likely be a reader.
To filter devices by panel, select a panel from the drop-down. To search for device by name, enter in the search term and click the Find button.
Select the device.
Click the Next button.
Select the video recorder from the Video Recorder drop-down.
Click the camera icon next to a camera to link it to the device. The selected camera will be indicated with a red check mark symbol.
Click the Save Link(s) button.
Click the Add More button to add more cameras. When you are finished, click the Finish button.
Appendix B
Client Installation
The steps in this document describe how to perform 3VR integration on an OnGuard server. In order to view video from the 3VR SmartRecorder on an OnGuard client machine, you will need to perform the following steps from this guide on each client:
Refer Install Accessory Add-on
...
Open the Control Panel.
Select Display.
Click the Settings tab.
Click the Advanced button.
Select the Troubleshoot tab.
Drag the Hardware acceleration slider to the left (None).
Click OK.
