Page Comparison

...

1. Launch 3VR System Manager.

2. In the Configure tab, select the name of the VIP Appliance to view its settings.

   Image RemovedImage Added

3. On the right-hand side of System Manager, click Common Operations, then click Installed Support Tools.

   

4. In the Installed Support Tools window, check whether Network Traffic Capture Support appears in the list of tools. If it does, proceed to Installing ATM Data Capture Plug-in.

5. Otherwise, continue to the next step to install it.

   Image RemovedImage Added

Installing Network Capture Support Package (If Necessary)

...

1. Click the Maintenance tab to go to the Maintenance panel.

2. Click the Update Software tab.

3. Check the box next to the name of the appliance to select it.

4. Click Inspect. Check the Status column to verify that the appliance is in a ready state:

   • “OK” is displayed if the system is operating normally and ready to be upgraded.

   • “Unauthorized” will be displayed if the current user is not authorized to install software on the selected server.

   • “Unreachable” will be displayed if the system is not in a state where it can be upgraded.

5. Click Update.

   Image RemovedImage Added

6. In the Choose 3VR Update File window, locate the Network Capture Support package file, named NetworkCaptureSupport.3pa:

   • If you are connected to the VIP Appliance with a laptop or over the network, navigate to the drive on your computer where you have saved the file. Click to select it.

   • If you are connected to the VIP Appliance with a monitor, mouse, and keyboard, browse to the USB drive or CD containing the file and click to select it.

7. Click OK. System Manager will install Network Capture Support on the selected appliance(s). The Status column will show the status of the update as it progresses.

8. When the update is complete, the Status column for each appliance will show “Done”.

   Image RemovedImage Added

9. Return to the Installed Support Tools dialog as described in Network Traffic Capture Support topic and verify that Network Traffic Capture Support is now listed.

...

1. Connect an Ethernet cable from the VIP Appliance’s primary network card to the network switch.

2. Connect the ATMs to a hub.

3. Connect the hub to the network switch.

4. Connect an Ethernet cable from the VIP Appliance’s secondary network card to the hub.
   

   Image RemovedImage Added

Port Mirroring Setup

1. Set up a port on the network switch that will mirror traffic from the ATM host.

2. Connect an Ethernet cable from the VIP Appliance’s secondary network card to the mirrored port.

3. Connect an Ethernet cable from the VIP Appliance’s primary network card to the network switch.
   

   Image RemovedImage Added

   Image RemovedImage Added

Binding Cameras to Plug-In

...

1. After binding cameras to the plug-in (step 3.2), links will appear under Bound Cameras for each camera.

2. Click a link (for example Edit “1. ATM Camera”) to edit the settings for that camera.

3. Type the IP address of the ATM in the ATM IP Address box.

4. Type the ATM ID in the ATM ID box. This will be displayed on transaction events generated by the ATM in 3VR OpCenter.

5. Click OK to save your changes and return to the Configure panel.

   Image RemovedImage Added

6. Repeat steps 2 to 5 for any remaining cameras bound to the ATM Data Capture plug-in.

...