Versions Compared

Version Old Version 2 New Version 3
Changes made by

Anand Rajaraman

Anand Rajaraman

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Connect the ADAM 6050 to the network with the Ethernet cable.

  2. Launch the Adam Apax .NET Utility.

  3. Right-click your computer’s IP address (under Ethernet) and select Search. The utility will then search the network for ADAM modules on the network.

    Image RemovedImage Added

  4. The default IP address of the ADAM module is 10.0.0.1. You will find it listed under the Others item, named something like ADAM5000TCP_6000.

  5. Configure the network settings of the ADAM, then click Apply Change.

  6. You will be prompted for the password; the default password of the ADAM module is 00000000.

    Image Added