...
Click the plug-in name to view its settings.
On the right side of System Manager, select the Bound Cameras field and click the ... button.
In the Bind Plug-in to Cameras dialog box, click the check box beside each camera that should be bound to the CNP plug-in.
Click OK to return to the Configure panel.
A pop-up will be displayed notifying you that the 3VR system software must be restarted after making changes. Click OK to close the pop-up message and acknowledge the warning. You will restart software as the last configuration step.
In the Configure tab, select the plug-in name to view its settings.
Click Edit Settings.
In the Search String for POS Customer Dwell Zone, enter the keyword used in Step 2.1. for example, if your created customer dwell zones named “Register 1 Customer” and “Register 2 Customer”, you could use the keyword “Customer” here.
...
Consult the documentation for the PoS transaction plug-in to determine how to generate transaction events.
In 3VR OpCenter, click the Monitor tab to go to the Monitor panel.
Click camera numbers to select the cameras with the CNP plug-in.
Click the arrow below the camera selector to open the event type drop-down menu.
Select [ ]Dwell and the appropriate event type for the transaction plug-in.
With no object currently in the customer dwell zone for a given channel, generate a PoS transaction on that channel. Wait ten seconds.
Click on the PoS event.
Click on the Details tab. The final field should be Suspect and the value should be 100.
Place a large object in the customer zone to represent a customer. A ladder or shopping cart is fine. Make sure that a Dwell event appears for that customer zone.
While the Dwell event is open, generate another PoS transaction event. Wait ten seconds.