...
- Log in to 3VR System Manager.
- Select a channel.
- Go to General Settings.
- Select Channel Privacy Schedule for Disabling video.
- Select Edit Schedule.
- Select an existing weekday and click Delete Weekday as shown in the Figure below.
- Select an existing holiday and click Delete Holiday as shown in the Figure below.
Adding Multiple Schedule on a Weekday
The 3VR privacy scheduling feature allows the user can edit multiple schedules given on any weekday on the same channel.
- Log into 3VR System Manager.
- Select Channel->General Settings->Privacy Schedule for Disabling video in Edit Schedule.
- Edit a weekday schedule to start recording for 30 minutes in between the schedule office hours as shown in Figure below.
In the Figure below, on Monday, the camera is scheduled to record from 17:00 to 17:30 in between 8:00 AM to 23:30 PM.
- Switch to 3VR OpCenter from 3VR System Manager to confirm the recording of camera from 17:00 PM to 17:30 PM.
The Privacy Settings is applied after 17:30 PM and continues till the schedule time @23:30 PM.
In Figure below the recording of video take place from 17:00 PM to 17:30 PM.
| Note |
|---|
After the schedule time the Channel is paused, and no video recording happens. The user can go back to OpCenter to make sure the recording does not happen during the scheduled time. |
Determining Privacy Scheduling Precedence
The Table below describes the precedence order in privacy scheduling at the Channel level and Appliance level in order to record video after the schedule time.
| Appliance | Channels | Weekday | Holiday | Precedence | |
|---|---|---|---|---|---|
| 1 | Privacy settings enabled at Appliance level | Privacy settings enabled at all Channel levels below Appliance | Adding a Weekday Schedule on Monday at Appliance Level | Adding a Holiday Schedule on Monday at Channel level | The Holiday Schedule at Channel level takes the Precedence |
| 2 | Privacy settings enabled/disabled at Appliance level | If all channels, have their own privacy settings that are different from the Appliance | Adding Weekday Schedule | Adding Holiday Schedule | The Channels take the Precedence |
| 3 | Privacy scheduling disabled during Holiday on Weekday Monday | Privacy settings on Channel have Monday as Weekday | Adding Weekday Schedule | Adding Weekday Schedule | Channel Privacy Settings take Precedence and Video is not recorded |
| 4 | X | Disabling/Enabling /Removing paused channels | Adding Weekday Schedule | Adding Weekday Schedule | The channel privacy setting takes precedence based on the status of the paused channels |
Appliance Template
Appliance templates save user time and get the job done quickly by applying the existing settings. The template is saved in .3cf format.
Saving Appliance Template
To create appliance template:
- Log in to 3VR System manager.
- Right click VMS Server and select Save Template as shown in the Figure below.
- In the Create Template dialog window, select the settings that are required as shown in the Figure below. Click to Save to File.
- The Save Template window displays. Enter the file name and click Save. The file is saved in .3cf extension to the destination.
Applying Camera Settings at Channel Level
Applying Camera Settings saves the user time at channel level when multiple cameras need to configure at Appliance level. To copy camera settings:
- Log in to 3VR System Manager.
- Select a Channel.
- Go to Common Operations -> select Copy Camera Settings
- Select the Source Camera drop-down from where the settings must be copied to the Destination Camera.