| Table of Contents | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Enterphone screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time, and click +.
...
Create a Floor Access Group
...
Go to System->Enterphone->SIP
The SIP account name is shown under “User”
Look for “Registration Status”
If the status is “Not Registered”, click “Register” to register the SIP account.
Once registration is done: Registration Status, Ping Response and Query Response should show “Ok”. Should any one of the three statuses fail, contact Identiv support.
...
Differences in SIP-Enabled Panels
...
Go to Users
Either create or edit an existing user
Click “Create SIP Account”
Once a SIP account is created, the account name will appear . A along with a delete account button and , a QR code button will also appearand an email button:
To remove the SIP account, click the “[ X ]” button.
To show SIP account’s QR code, click the blue button
to the right.
...