...
The following lists the required configuration:
Software | Version |
|---|---|
Velocity | 3.8.3.3284 or higher |
Velocity IDS Framework | 1.0.0.146 |
Bosch IDS Plugin | 1.0.3.198 |
Licensing
Licensing Velocity Integration and Bosch IDS Plugin
...
Right-click on an area to view the list of supported commands.
The events include all alarms that are notified based on the configured areas. The table lists the supported event command types with descriptions.
Command | Description |
|---|---|
Silence Bells | Allows to silence the alarm bell generated by an event |
Activate Bells | Allows to activate the alarm bell caused by an event |
Disarm | Allows to Disarm (OFF) |
All on Instant | Turns on all points with no entry or exit delay |
All on Delay | Turns on all points with entry or exit delay |
Part on Instant | Turns on only some of the points with no entry or exit delay |
Part on Delay | Turns on only some of the points with entry or exit delay |
Force All on Delay | Forces all points to turn on with entry or exit delay |
Force All on Instant | Forces all points to turn on with no entry or exit delay force |
Force Part on Delay | Forces only some of the points to turn on with entry or exit delay |
Force Part on Instant | Forces only some of the points to turn on with no entry or exit delay |
Stay One Arm | Arm in stay mode |
Away Arm | Arm in away mode |
Force Stay One Arm | Force arm in stay mode |
Force Away Arm | Force arm in away mode |
Reset Sensors | Resets the sensors in the area from a previous action and returns to normal operation |
Bosch IDS Panel Points
Points refer to single points such as doors, windows, fire detection sensors, etc. A group of points comprises an area such as the lobby, conference room, etc.
...
The table lists the supported command types:
Command | Description |
|---|---|
Bypass Point | Bypasses the selected point |
Unbypass Point | Un-bypasses the selected point |
Bosch IDS Panel Outputs
Outputs in IDS refer to automatic control of devices in areas such as entry/exit gates or lighting in secured zones.
...
The table lists the supported command types.
Command | Description |
|---|---|
Control Output ON | Turns the output relay ON |
Control Output OFF | Turns the output relay OFF |
Status Viewer
The Status Viewer allows you to view the status of Panels, Areas, Points, and Outputs.
...