Page Comparison

...

• The 3.6 SP2 or later release of the Federal edition of Velocity Server

• The Velocity Certificate Checking Service (VCCS) running on a Windows server)

• M2, M8, Mx, or Mx-1 controllers

• A SNIB3 communications expansion board (or the equivalent functionality built onto the Mx-1's mainboard) for each controller running in FICAM mode.

• An RS-485 Readers Expansion Board (RREB) , (or the equivalent functionality built onto the Mx-1's mainboard, ) for each controller running in FICAM mode

• FICAM-capable RS-485 card readers (such as Identiv's uTrust TS Government readers or Veridt's Stealth Bio or Stealth Dual readers)

• Enrolling PIV, PIV-I, or TWIC cards into Velocity requires an intelligent card reader with contacts (such as Identiv's SPR332 v2.0 Secure Class 2 PIN pad reader) and a fingerprint reader.

For most customers, Identiv's FICAM solution enables you to upgrade an existing Velocity system instead of purchasing and installing a new physical access control system. Because this is a relatively complex process with many steps, you might want to obtain assistance from the Identiv Identiv’s Global Services (IGS) group.

The following table shows the compatible builds of the software components in Identiv’s 13.02 FICAM Solution, corresponding with Velocity’s most recent releases.