Introduction
...
For more information regarding alerts, please refer to Alert Levels.
First Person In Configuration
The “First Person In Option” ensures the controlled area scheduled unlock is only activated if a user is granted access to the controlled area either before using the Early Bird Window option or during the scheduled unlock. This may be useful on day’s with inclement weather when employees cannot reach work. The controlled area is not automatically unlocked unless a badge holder is physically present. When the controlled area is accessed with a valid badge, the controlled area schedule is activated, and the controlled area will be unlocked.
The controlled area remains in default mode [Lock] until a valid badge is used to access the controlled area, even after the beginning time for the schedule.
A badge is required to activate the controlled area schedule anytime the controlled area mode is reset to Lock manually.
Login to Primis
Select Controlled Areas, as shown below
Select the controlled area to apply the First Person In Option
a. Select “Unlock Schedule” Tab
b. Select the controlled area Unlock Schedule
i. ON Action, choose Unlock
ii. OFF Action, choose Lock
iii. Select the + button
c. “First Person In” options are displayed
d. Select the checkbox for Enabled
e. Select the Access Group for the users desired to use first person in
f. Select Save
Access Group:
The access group that has the privilege to unlock the controlled area when entered. This allows the schedule to be enforced only by users with that access group assigned to them.
Early Bird Window:
User can enter the facility ahead of the unlock-schedule. Once Primis has determined that a valid user is in the area; it will unlock the door at the schedule time. This ‘early bird’ window can be between 30 minutes to 3 hours. A typical scenario will be that a school teacher enters the school an hour before it opens; the controlled area will remain locked until the scheduled unlock time for students to enter the facility. A card holder who enters the building before this window will not trigger the unlock-schedule.
Close Area on Double Swipe:
The card holder with the specified access group can lock the controlled area with a double card swipe when the option is selected.
Door Monitor Tab
There are two Door Monitor Alarms for a controlled Door area: a Door Held Open Alarm that indicates a door being held open for a given period of time and a Door Forced Open Alarm that indicates that a door is being forced open without the use of a reader or an entry/exit device.
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Primis screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...