Introduction
...
Options | Description |
Description | This field identifies what input signal is being monitored. |
Activate Relay Output | This option configures the Primis Bridge to activate the specified relay when the input is shorted. Note: This feature is executed in the Primis Bridge hardware level and it does not require a connection to a Primis server. Thus, this is generally used as a “Request to Exit” function (e.g. via a push button). |
Activate Relay Output: Relay: | This drop-down list specifies which relay is to be activated as input event occurs. This drop-down menu is only active if the above Active Relay Output checkbox is checked. |
Default Activation Time | This drop-down list specifies the number of seconds that the relay activates as input event occurs. |
Supervised Input Ready: | This checkbox is for Primis Bridge Devices that are equipped with supervised inputs. This field should be left uncheck, unless the optional Supervised Input Board is connected. For specific instructions on how to connect the supervised input board, please see the appropriate instructionsis Supervised. |
LED Properties
Description: Identifies the LED when adding to Port Trigger Actions or viewing in Activity Logs.
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Primis screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...