Introduction
...
In the above example, change this 3-day event into a 2-day event that commences only on Dec 4 and 6.
Double-click the event block on Dec 5 in the calendar.
In the event dialog, click “Delete” to remove Dec 5 from the series.
Event Updated.
Reset an Event Series
To return the above example event to its original 3-day event, double-click on the event block.
Click “Edit the Series” button.
In the event dialog, click “Reset Series”.
Click “Reset Series” again in the confirmation box. The event should return to its former setting.
Adjust an Occurrence Within an Event Series
To adjust the configuration on an occurrence within a series, such as changing start/end times. Double-click on the occurrence event block and click “Edit Current Occurrence”.
Adjust start/end times.
Click “Save”.
Notice that the adjusted occurrence is now considered an exception although it is still part of the event. The event block has a slightly different icon
...
Other Recurrence Exceptions
Weekly Recurrence.
Monthly Recurrence - can have the event repeat on a specific date every month or a weekday on a certain week of the month.
Yearly Recurrence - can be a fixed date of a month, a day of a certain week of a selected month (e.g. first Monday of November).
Setting the Default Calendar Scheduler Risk Level
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Primis screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...