Introduction
| Table of Contents | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Primis screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
Primis Commercial or Primis Enterprise links the Primis application to each server; there are three methods of deployment.
...
Understanding Graceful Access
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...
Clicking on the alarm in the bottom alarm tray will snap to the alarm, and pull the alarm video associated with the alarm on the right-hand video alarm panel:
Rick Right clicking the controlled area will give you the option to change the state of the controlled area, acknowledge and clear the alarms.
...
Export Video
Create a name and enter it into the system:
Select Save
Navigation Overview: Event Video
...
In the Controlled Areas navigation tab, click on the Maps link. The following screen is displayed:
Current maps are listed on the left and the controlled areas are listed on the right. Click on a map to view it; click on the edit button to change the file associated with this map.
To add a new map, click on the +Add Map button. The following screen is displayed:
Enter Name and a Description for the map.
Click the [Choose file] button beside Map Image to import the map file image.
Click the [SAVE] button.
...
Click on the Controlled Areas navigation tab.
On the left, click on the Maps link. The following screen appears:
Drag and drop controlled areas onto the point.
...
Scrolling over an icon will show the name and a trash can icon. Click on the trash can icon to remove the controlled area or camera from the map:
...
Icons can be added to a map to indicate whether a controlled are area is Closed, Open, or in Lockdown. Primis comes with three standard icons. Images of these icons can be changed in on the Icons page.
...
Configure Custom Map Icons
...
In the Controlled Areas navigation tab, click on the Icons link. The following screen is displayed:
Click the [Choose file] button beside the icon to change and navigate to the new icon image and click Open.
The selected file name is displayed. Click the [Update] button to replace the icon image with this new image.
...
Alert Levels allow the Primis server to adjust its access control behaviour behavior globally. Controlled Area Schedules and Access Groups can be restricted by alert levels. As a security level escalates, the Primis server can restrict access accordingly. For example, a the front entrance of a building is open during office hours. However, when the alert level is escalated to HIGH, the system can automatically lockdown lock down the front entrance by overriding the open schedule.
...