Page Comparison

...

...

• Physical access to your new kiosk is secured through the keyed lock mechanism located back side of the kiosk.

• To ensure proper operation of the locking mechanism, ensure that the lock strike remains perpendicular to the leading edge of the kiosk when the unit is open and showing the strike. If the lock strike is not in the correct position the mechanism may not effectively lock the kiosk.

• It is strongly recommended that keys be copied after purchase and placed in a documented and secured location to allow access to the kiosk as needed. Loss of keys will require physical removal and replacement of the lock at the expense of the customer. Lock replacement or modification must be completed by a technician approved by Identiv. Any uncertified or third-party modification of the lock mechanism will immediately void the manufacturer's warranty.

...

Supplied voltage above or below the above specifications can result in damage to internal components and processes and may void the manufacturer manufacturer’s warranty.

The cables used to connect power to the Enterphone kiosk must meet the following requirements:

...

• Tenant and access updating of the kiosk is accomplished through the Identiv Web Graphical User Interface (GUI). The Web Administration and login page for this GUI are accessible via any standard web browser, provided that the PC is on the same Local Area Network as the kiosk. The default IP address for each kiosk is 192.168.123.101.

...

Terminal Block 1

Connections for Terminal Block 1 (TB1)

...