| Table of Contents | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
...
Use a graphic editor or Paint to create your own screensaver and name it to match the filename. Filename: screensaver_1280x1024.gif for Enterphone 19 and Kiosk, screensaver_800x1280.gif for Enterphone iQ. Once the file is ready use the Go to Systems > Administration > Update Media Files from the System tab to upload the file, use the Choose File button to navigate to the file location, select the file and click UPDATE. The original file will be over-written.
Restart the Panel using the Reboot link at the bottom of the Utilities page.
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Enterphone screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time, and click +.
...
Create a Floor Access Group
...