...

1. Click on the Administration link from the System navigation tab.

2. Click on the System Parameters sub-link.

3. Click on the file you would like to edit.

4. Make any changes necessary to the text presented in the text area.

5. If you would like a backup of the existing file, choose Write Backup.

6. Check the Reboot after save box if a reboot is required. Keep in mind that for the changes to take effect a full system reboot is required.

7. Click Save.

To Backup Parameter Files

1. Click on the Administration link from the System navigation tab.

2. Click on the System Parameters link.

3. Select the file you would like to back up.

4. To back up, click the Download link next to the file.

5. Select a location to back up the file.

6. Name the file with the extension *.ini.

7. Click Save.

Main and Peer Configuration (Sync Enterphone Units)

...

1. Click on the Access navigation tab.

2. Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.

3. In the Actions bar, click on Add Access Group. The following screen is displayed:

   

4. Enter a Name and a Description.

   

5. Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Enterphone screen)
   For more information on Risk Levels see the Alert Level Managementsection.

6. Select a Controlled Area for this group.

7. Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.

8. If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.

9. Click Save.

Global User Access Groups

...

1. Create a new Controlled Area with the elevator reader.

2. In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time, and click +.

...

Create a Floor Access Group

...