Page Comparison

...

Main and peer configuration creates a link between two or more Enterphone units. The Enterphone panel can also be peered to a Primis instance server or Enterphone cube server. The Main servers automatically start copying data once a peer establishes communication.

...

1. Open the siteEngine.ini using the instructions from System Parameters.

2. Locate the line MainPeers=

3. Add the IP address of the main server. For example, MainPeers=192.168.123.101
   Note: If the Main unit is a Primis instance server or Enterphone cube server, please set MQPeer=yes. Otherwise, for Main/Peer network containing only Enterphone panels, set MQPeer=no

4. Save the siteEngine.ini

5. Restart the Enterphone peer system

...

1. Click on the Access navigation tab.

2. Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.

3. In the Actions bar, click on Add Access Group. The following screen is displayed:

   

4. Enter a Name and a Description.

   

5. Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Enterphone screen)
   For more information on Risk Levels see the Alert Level Managementsection.

6. Select a Controlled Area for this group.

7. Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.

8. If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.

9. Click Save.

Global User Access Groups

...

1. Create a new Controlled Area with the elevator reader.

2. In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time, and click +.

...

Create a Floor Access Group

...