| Table of Contents | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
...
Click on the Suites navigation tab.
In the Actions bar, click on Add Suite. The following screen is displayed:
Enter a Suite Name or the Number.
Enter a 4-digit Suite Code that is to be displayed in the directory of a panel.
Enter the Phone number for the Suite.
• For an EPX relay number, enter the 3-digit relay number.Enter an Alternate Phone number. If the first number is not accessible by a panel the alternate number will be dialed.
Select the Guest Access Group that applies.
Optional: Business - Refer Business Management section below.
Click on Save.
...
For more information regarding alerts, please refer to Alert Levels.
Door Monitor Tab
There are two Door Monitor Alarms for a controlled Door area: a Door Held Open Alarm that indicates a door being held open for a given period of time and a Door Forced Open Alarm that indicates that a door is being forced open without the use of a reader or an entry/exit device.
...
Click on the Muster navigationtab.
Check the box in the Reset column next to the user and click the [Reset] button above it.
Mustering
The Muster tab has two sub-links: Muster/Anti Passback and Emer. Mustering. This functionality must be turned on in licensing.
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Enterphone screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time, and click +.
...
Create a Floor Access Group
...