Introduction
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Primis screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...
In the Controlled Areas navigation tab, click on the Icons link. The following screen is displayed:
Click the [Choose file] button beside the icon to change and navigate to the new icon image and click Open.
The selected file name is displayed. Click the [Update] button to replace the icon image with this new image.
...
Alert Levels
Alert Level Management
Alert Levels allow the Primis server to adjust its access control behaviour globally. Controlled Area Schedules and Access Groups can be restricted by alert levels. As a security level escalates, the Primis server can restrict access accordingly. For example, a front entrance of a building is open during office hours. However, when the alert level is escalated to HIGH, the system can automatically lockdown the front entrance by overriding the open schedule.
Alerts Levels
...
When enabled in the license file Primis Admin, the current alert level is always shown at the top of the page.
...
In this example, Access Groups Standard Employees have no access when the alert level is “High” or “Severe”.
...
Controlled Area Configuration of Alert Levels
In this example, the Controlled Area is set to open during office hours only when the alert level is Low or Guarded. To configure alert levels for controlled areas, go to the Unlock Schedule tab on the View/Edit Controlled Area page.
...
| Info |
|---|
Please refer to Chapter Controlled Areas for more information. |
Change of Alert Level
Primis Administrators can set the current Alert Level by going to the System tab under Administration and clicking Risk Level.
...