Introduction
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Primis screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...
Click on the System navigationtab.
On the left, click on the Administration link.
Click on the System Parameters sub link.
Click on the sitePanel.ini file.
Edit the line screensaverTimeOut=60; change 60 to any other value. Do not edit any other value.
Check the Reboot after save box. This will do a full restart of the panel after you save the file.
Click Save.
...
Business admin users are restricted on what they can add or view. Also, business admin users do not have access to the System tab and are therefore unable to manage the system or view any system related information. In addition, business admin users cannot add or delete suites, controlled areas, or schedules. They can add user access groups and link them only to the controlled areas that are associated with that business. Any of the activity logs that are related to other businesses are not viewable by that business admin user. A single business can have more than one controlled area. Also, a single business admin user can belong to more than one business.
...
In the System > AMS tab you have the ability to choose if you are able to view the Monitor tab. This is also where you would go to disable the video prior to the setup of video. AMS Server will not be covered in this section; for information on setup of the AMS application please see.
...
AMS-Lite supports the ability to monitor the system without maps. The purpose of this mode is that if the end-user chooses not to use the mapping of devices, there is a clear way to list and report on the status of all of the devices.
...