Introduction
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Primis screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...
Go to System -> Mobile.
Click menu item Mobile Onboard Email Template.
Enter Mail Subject Text, e.g. Mobile App Registration.
Enter Mail Content that shall contain links to download Mobile App, user password and any information that is valuable to the registration process.
A reserved token USER_PASSWORD can be embedded in the mail content which will then be replaced by the user password assigned during the registration process.
Managing Enterphone
...
Panels
MESH Enterphone panels provide visitors with a way to communicate with tenants from the front common entrance. Tenants then can grant or deny access to the building. MESH Enterphone panels display a list of users that can be dialed. For hardware installation please view the MESH Hardware Enterphone Installation Guide.
By default MESH Enterphone panels are added to a single controlled area. This allows the panel to grant access if the tenant presses the relay activation digit when dialed.
Enterphone
...
Panel Settings
MESH Enterphone panel settings such as talk time, relay access digit and activation time can be configured. To access these settings;
Click on the System navigationtab.
On the left, click on the Enterphone MESH link.
In the Actions bar, click Add Panel. The following screen is displayed:
Enter the Panel ID. This ID number can be found in the sitepanel.ini file for this panel. See Mesh Parameter Files for more information.
When panels are working as Global panels, each panel in the Main-Peer network must have a unique Panel ID. The recommended ID’s would be to start from the default 10000 and onwards (e.g. 10000 Front Lobby Panel, 10001 Back Door Panel).
...
8. Enter the Talk Time: This is the maximum duration the call can occur (in seconds) before automatically hanging up.
9. Click Save.
Enterphone
...
(Controlled Area Tab)
The Enterphone MESH tab allows you to attach MESH Enterphone panels to Controlled Areas. NOTE: MESH Enterphone panels must have already been created in the System -> Enterphone MESHscreen.
Please refer to the Mesh Enterphone Panel Settings section for more details regarding MESH Enterphone panels.
In the Enterphone MESH tab on the View/Edit Controlled Area screen:
Select an Enterphone MESHpanel from the dropdown box.
To add a second panel to this controlled area, click the add + button. to
Click Save.
Changing Screen Saver Image File
When MESH Enterphone Panels are idle for more than the time set for the default screensaver time out, the default screensaver graphic is displayed. This graphic can be changed from the media files. Use the instructions in the Media Files section to access and change screensaver_1024x768.gif file.
...
Click on the System navigationtab.
On the left, click on the Administration link.
Click on the System Parameters sub link.
Click on the sitePanel.ini file.
Edit the line screensaverTimeOut=60; change 60 to any other value. Do not edit any other value.
Check the Reboot after save box. This will do a full restart of the panel after you save the file.
Click Save.
Calibrate
...
Enterphone Screen
MESH Enterphone parameter files are used to configure the software on both the server and the panel.
...
Enterphone Parameters Files
MESH Enterphone parameter files are used to configure the software on both the server and the panel. These files are located in the System Parameters link under the System -> Administration tab. These files can be edited using the in-browser text field provided by clicking on the file or backed up by clicking on Download and edited with a text editor locally then uploaded back to MESH. Once the files are uploaded back to MESH the server must be restarted using the Reboot link at the bottom of the Utilities page or by checking the Reboot after save option on the Edit page.
...