Introduction
...
As a security feature, after a certain period of inactivity, Primis will automatically log you off. At that point, the login page will appear, and the user will have to log back in.
...
Log in to Primis using the instructions in Login and Log Out above.
Click on the System navigation tab at the top of the screen.
On the left, click the Administration link.
Click the Admin Users sub link.
In the Actions bar, click on Add Admin User. The following screen is displayed:
Enter the User ID, Last Name, and First Name.
Enter a Password that is different than the one provided.
Verify the Password.
Beside Business, select All.
Beside Sites, select ALL.
Select Full Access for all of the parameters from Suites to Active Directory.
For Mustering, select the required level.
Select the Language that this full administrator would like to use.
Select the View Suite/User Page Size 10, 25, or 50 to set the default number of suites/users per page this admin user sees when viewing the listing.
Click Save to save the full access admin user.
Click the [Log Out]buttonto log off and test the new user ID.
Log in with the user ID and password that was created in the previous steps.
Verify that you can log in successfully and that your new user has full privileges.
Log out once more and log in using the default user account name.
Click on the System tab, Administration, Admin Users and select the default “Primis” user account.
Change one of its privileges and click Save.
Log out and log in again as your newly created user.
Go to Admin Users again and select the default “Primis” user account.
Click on Delete and OK.
...
Click on the System navigation tab.
On the left, click the Utilities link.
Click the System Date/Time sub link.The following screen is displayed.
Select a Time Zone from the dropdown box.
Check the Enable NTP box.
Enter an IP address or a hostname for the NTP Server pool.ntp.orgis a commonly used public NTP server. If no local NTP server is available this hostname can be used.
Click Save.
...
In case no suitable definition is available, use the Default Card Format drop down list to select a default format. Please note that card format definition in Primis is highly customizable. Please feel free to contact Identiv Technical Support (vsicountsupport@identivsupport@identiv.com ) should you require a custom format.
...
Identiv’s Primis Encryption Brides Bridges allow door hardware to be connected to Primis servers. Bridges for card readers communicate with Primis software. Data is received from card readers, encrypted and sent via IP to a Primis server for processing. Relays on the Primis Bridge are activated by commands from a Primis server to lock or unlock doors.
...
You can also find the Primis Bridge Utility at the bottom of the Devices - Main page, and clicking on the Primis Bridge Discovery Tool check box.
...
Using the Web Based Primis Bridge Utility
Click on the System navigation tab.
On the left, click the Utilities link.
Click the Bridge Utility sub link.
Click the [Scan Devices] button.This process might take a minute or two.
Click on the MAC address of the device you wish to provision.
Assign the appropriate IP information to the device or choose DHCP. You may need to contact your system admin for this information. If the DHCP checkbox is checked, the IP, Netmask and Gateway fields are automatically populated once the bridge receives the DHCP information.
To update Bridge Configuration only, click on Save. Note that it might take up to two minutes to save.
To update and add the Bridge to Primis, check Save & Add Device To Primis checkbox and click Save.
Enter the name by which you’d like to refer to the device and click the Save button.
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Primis screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...