Scan and Detect

...

IDENTIV EG-2s in the Network

1. In System->Devices, check “Device Discovery Tool” checkbox

2. Click the EG2 IDENTIV EG-2 Devices tab

   Image RemovedImage Added

3. Click “Scan Devices” button. All EG2s IDENTIV EG-2s in the network will appear in the data table.

   Image RemovedImage Added

4. To configure EG2IDENTIV EG-2, click the ID/Mac address of the unit:

   Image Removed

   EG2 Image Added

5. IDENTIV EG-2 Configuration Screen

   Image RemovedImage Added

Assigning IP Address

1. By default, EG2 IDENTIV EG-2 uses DHCP addresses. To configure Static IP, use the Type dropdown button and Select STATIC type and fill in the corresponding IP addresses:

   

Assigning

...

PRIMIS Server Address

1. EG2 IDENTIV EG-2 can connect to a primary and a secondary Velocity SMB PRIMIS server. Velocity SMB PRIMIS server addresses can either be IP addresses or DNS names. To configure Velocity SMB PRIMIS server address(s) fill out the two Server IP fields.
   

   

Enabling TLS connection to

...

PRIMIS Server

1. To enable a secured TLS connection to the Velocity SMB PRIMIS server, check the TLS enabled checkbox on the configuration page:

   

Setting Up Master Bridge (release 1.1 and above)

1. Master Bridge(s)Velocity SMB PRIMIS Administrators can designate one or more EG2s IDENTIV EG-2s in the fleet as “Master Bridge(s)”. A Master bridge facilitates global I/O access to the rest of the “Member” bridges.*note: it is highly recommended that Master Bridge(s) use static IP’s.

   

2. Member Bridge(s)“Member” bridges need to know the IP address(s) of “Master” bridges so as to forward Global I/O requests to the whole EG2 IDENTIV EG-2 network. To configure Master Bridge Host IP, uncheck Master Bridge checkbox and enter IP:

   

NTP Configuration

1. EG2 IDENTIV EG-2 is able to use NTP to sync its system clock. To configure NTP, enter the NTP server’s address and check “enabled.” By default, the NTP server address is pool.ntp.org.*note: for NTP to work, please make sure a legitimate Name Server is configured on the EG2IDENTIV EG-2.
   

   

Installing TLS Certificate

1. After the TCP connection is established between the Velocity SMB PRIMIS server and the EG2IDENTIV EG-2, we need to install the Velocity SMB PRIMIS CA certificate and the client certificate on the EG2 IDENTIV EG-2 by clicking the “Install Certificate” button. The client certificate, together with the Velocity SMB PRIMIS CA certificate, is used for the MQTT authentication.
   

   Image Removed

...

1. Image Added

IDENTIV EG-2 Configuration on Multimaster Spoke Database Server

If the server is configured as a multimaster spoke database server, the following additional steps are required before the EG2s IDENTIV EG-2 can be configured.

1. Go to System->Utilities->Server Activation.

2. Enter the configuration for the Enterprise License Server and click “Update” to update the license server information.
   

   

3. Go to System->EG2 >IDENTIV EG-2 Devices.

4. Click the “Install Server Certificate” button to install the server certificate from the Enterprise License Server.
   

   

...

IDENTIV EG-2 Configuration on the Slave Database Server

If the server is configured as a slave database server, the following additional steps are required before the EG2s IDENTIV EG-2s can be configured.

1. Go to System->Utilities->Server Activation.

2. Enter the configuration for the Root CA Server and click “Update” to update the license server information.
   

   

3. Go to System->EG2 >IDENTIV EG-2 Devices.

4. Click the “Install Server Certificate” button to install the server certificate from the Enterprise License Server.
   

   

Enrolling

...

IDENTIV EG-2 Device in

...

PRIMIS Server

1. In System->Devices, check “Device Discovery Tool” checkbox

2. Click EG2 IDENTIV EG-2 Devices tab
   

   Image RemovedImage Added

3. To enroll a EG2 an IDENTIV EG-2 Device, click the Import button.
   

   

4. On the next page, enter the device’s name and click Save.
   

   Image RemovedImage Added

5. The EG2 IDENTIV EG-2 Device is now enrolled into Velocity SMBPRIMIS Server. Administrators can now assign the device to Controlled Areas.
   

   Image RemovedImage Added

Managing

...

IDENTIV EG-2 Devices

1. Goto System-> EG2 IDENTIV EG-2 Devices

2. Under Actions, there are a few control buttons to manage, troubleshoot, and update EG2 IDENTIV EG-2 devices:
   

   

...

Enroll EG2 IDENTIV EG-2 Device

...

Sync EG2 IDENTIV EG-2 Database

...

View Device Logs

Ping/Identify EG2 IDENTIV EG-2 Device. Status LED on the device will alternately flash red, green and blue for 30 seconds.

...

Download the Application or OS firmware

Managing Sync schedules

EG2 IDENTIV EG-2 device is able to synchronize its onboard database with the Velocity SMB PRIMIS server as frequently as every hour. This onboard database allows EG2s IDENTIV EG-2s to function independently during Velocity SMB PRIMIS server outages or network failures. To assign sync schedules, simply click the corresponding checkbox under Device Sync Schedule.

...

Managing Application and OS Images

Velocity SMB PRIMIS Server can store EG2 IDENTIV EG-2 Applications and OS images for updates.

...

1. To upload the Application Image, Click the “App” tab under TRN. Click “Choose File”, select the image (*.strn) file, and click [ + ] to upload.

2. To delete the image file, click the [ x ] button for the image.

3. To upload OS Image, first, click the “OS” tab under TRN. Click “Choose File”, select the image (*.strn) file, and click [ + ] to upload.